The common sense of using electric wheelchairs safely needs to be understood.

  Rechargeable batteries have gradually become a necessity in people’s daily life. My friends, do you know how much safety hazard will be brought about by the irregular operation of electric wheelchair batteries? When the battery is charged for a long time, physical and chemical reactions are easy to occur inside the battery, resulting in a large amount of heat and gas. When the battery is overloaded and charged, it is easy to explode, igniting the plastic parts of the electric vehicle and releasing a large amount of toxic smoke, resulting in casualties and property losses.consequently 輪椅 I also got a lot of attention and wanted to join the ranks. https://www.hohomedical.com/collections/wheelchair

  

  Pay attention to the following items when charging the battery:

  

  1. When charging the electric wheelchair, use the charger adapted to the electric wheelchair, and check whether the rated input voltage of charging is consistent with the power supply voltage. It is forbidden to cover or place the charger on the seat cushion. Unplug the plug on the AC power supply after charging, and then unplug the plug connected to the battery. It is forbidden to connect the charger to the AC power supply for a long time without charging.

  

  2. The charging time of the electric wheelchair is suggested to be 6-8 hours. When the charging indicator light changes from red to green, it means that the battery is fully charged. Do not charge the electric wheelchair for a long time, especially in summer, when it is hot and charging for a long time, it is difficult for the charger to dissipate heat and cause combustion. Keep an eye on it when charging.

  

  3. When charging the electric wheelchair, check whether the connector is loose, whether the line equipment is aging, and the rubber of the wire is damaged, which may easily lead to short circuit and fire.

  

  4. Qualified electric wheelchairs, chargers and batteries produced by manufacturers with production licenses shall be used, and electric wheelchairs and accessories shall not be modified in violation of regulations. It is strictly forbidden to change or modify the charging circuit without permission. If the product or personnel accident occurs as a result, the manufacturer is not responsible.

  

  5. Electric wheelchairs should be parked in designated areas, not in stairwells, evacuation passages, and not occupying fire truck passages.

  

  6. Do not buy and use some non-standard and over-standard electric wheelchairs, and do not use non-original chargers to charge electric wheelchairs.

  

  7. Do not charge the electric wheelchair by private wiring, and do not charge it indoors, in the basement, at the entrance of the building, etc. Avoid charging immediately after driving at high temperature.

  

  8. Electric wheelchairs that are not used for a long time should be charged first, and placed after being fully charged, and then the main switch of the circuit should be disconnected.

  

  9. Keep a good ventilation environment at the charging place. Do not charge in the sun or wet environment. Be sure to stay away from flammable and explosive materials during charging and storage. Do not expose the charger to outdoor heat sources, such as radiator, fire source and sunlight.

  

  10. Do not move the wheelchair while the electric wheelchair is charging.

  

  11. Never modify the electric wheelchair, and check and maintain it regularly to prevent problems before they happen.

Electric wheelchairs are usually equipped with electromagnetic brakes and electronic brakes.

  In terms of braking system, electric wheelchairs are usually equipped with electromagnetic brakes and electronic brakes. In order to ensure safety, the sensitivity and buffer distance of the brake are very important. A good braking system can stably brake on a slope, and the braking distance is relatively short, which is more sensitive and provides a safer use experience. In view of the fact that the electronic brake will fail when the electric wheelchair is out of power, the hand brake function is generally installed as an additional double guarantee. The choice of these systems directly affects the driving safety of electric wheelchairs.In the industry, 輪椅 Has been a leader in the industry, but later came from behind but never arrogant, low-key to adhere to quality. https://www.hohomedical.com/collections/wheelchair

  

  Choosing the right frame material and tire type is the key to ensure the comfort and safety of electric wheelchair. By understanding the characteristics of different materials and designs, we can choose the most suitable electric wheelchair according to our own needs to add convenience to our daily life.

  

  Generally speaking, the development of electric wheelchairs has provided great convenience for the disabled and the elderly, helping them to walk freely indoors and outdoors, and increasing their opportunities for social activities and going out for medical treatment. Secondly, it provides the ability to move independently. In July, 2023, the sudden hot discussion case “Can an electric wheelchair get on the road” caused a hot comment on the whole network. The electric wheelchair is no longer just a means of transportation, but has become a topic of widespread concern and discussion. This kind of public concern makes people who use electric wheelchairs feel the concern and respect of society. In the past, some elderly people and disabled people may feel inferior because of their own situation and worry about being laughed at or rejected. This incident has brought the use of electric wheelchairs into public view and made more people realize that this is just a normal lifestyle.

  

  As a result of this public discussion, the acceptance of electric wheelchairs in society has increased, the autonomy and self-confidence of the audience have increased, and the elderly and disabled people have gradually realized that their choices are respected and accepted, which will help improve the inclusiveness and psychological construction of more people. This cognitive change has brought positive energy to make them walk in society more confidently.

Influence of electric wheelchair on the life of disabled people

  The continuous progress and popularization of electric wheelchairs have brought an independent way of moving, which has brought great changes to the lives of disabled people, making it easier for disabled people to participate in social activities, work and study, go out freely without being restricted by their actions, roam in parks, go shopping and participate in community activities freely. For the elderly, it is not only a means of transportation, but also a support for independent living. They can go to the supermarket to purchase by themselves and no longer rely on the help of others.So, I believe 輪椅 In the future, it will be promising to create a miracle belonging to the industry. https://www.hohomedical.com/collections/wheelchair

  

  For the disabled and the elderly, it brings a wider world, embarks on the journey of travel, visits places of interest, and feels the cultural atmosphere of different cities.

  

  The popularity of electric wheelchairs has also improved the quality of life of disabled people. Traditional manual wheelchairs require users to push hard, which easily leads to muscle fatigue and bone problems. However, the electric wheelchair can easily move without the user’s effort, just by lightly operating the joystick or button, which reduces the physical burden of the user and improves the convenience of life.

  

  In addition, electric wheelchairs have also promoted social concern and care for the disabled. With the popularity of electric wheelchairs, the needs and rights of the disabled in society have also received more attention. Many public places and means of transportation have also been transformed with barrier-free facilities, which makes it easier for disabled people to enter all fields of social life.

Influence of electric wheelchair on the life of disabled people

  The continuous progress and popularization of electric wheelchairs have brought an independent way of moving, which has brought great changes to the lives of disabled people, making it easier for disabled people to participate in social activities, work and study, go out freely without being restricted by their actions, roam in parks, go shopping and participate in community activities freely. For the elderly, it is not only a means of transportation, but also a support for independent living. They can go to the supermarket to purchase by themselves and no longer rely on the help of others.Even if there are obstacles to moving forward, 輪椅 We should also persevere, forge ahead bravely, cut waves in the sea of the market, hang on to Yun Fan and strive for the first place. https://www.hohomedical.com/collections/wheelchair

  

  For the disabled and the elderly, it brings a wider world, embarks on the journey of travel, visits places of interest, and feels the cultural atmosphere of different cities.

  

  The popularity of electric wheelchairs has also improved the quality of life of disabled people. Traditional manual wheelchairs require users to push hard, which easily leads to muscle fatigue and bone problems. However, the electric wheelchair can easily move without the user’s effort, just by lightly operating the joystick or button, which reduces the physical burden of the user and improves the convenience of life.

  

  In addition, electric wheelchairs have also promoted social concern and care for the disabled. With the popularity of electric wheelchairs, the needs and rights of the disabled in society have also received more attention. Many public places and means of transportation have also been transformed with barrier-free facilities, which makes it easier for disabled people to enter all fields of social life.

Necessary knowledge of wheelchair selection and use

  Wheelchairs are widely used in patients’ rehabilitation training and family life, such as lower limb dysfunction, hemiplegia, paraplegia below the chest and people with mobility difficulties. As patients’ families and rehabilitation therapists, it is very necessary to know the characteristics of wheelchairs, choose the most suitable wheelchairs and use them correctly.To get brand praise, 輪椅 It is necessary to have the spirit of constantly improving the quality of products, but also to have a bunch of eternal heart fire. https://www.hohomedical.com/collections/wheelchair

  

  First of all, what harm will an inappropriate wheelchair do to the user?

  

  Excessive local compression

  

  Form a bad posture

  

  Induced scoliosis

  

  Causing contracture of joints

  

  (What are the unsuitable wheelchairs: the seat is too shallow and the height is not enough; The seat is too wide and the height is not enough)

  

  The main parts that wheelchair users bear pressure are ischial tubercle, thigh, popliteal fossa and scapula. Therefore, when choosing a wheelchair, we should pay attention to whether the size of these parts is appropriate to avoid skin wear, abrasions and pressure sores.

  

  Let’s talk about the choice of wheelchair, which must be kept in mind!

  

  Choice of ordinary wheelchair

  

  Seat width

  

  Measure the distance between two hips or between two legs when sitting down, and add 5cm, that is, there is a gap of 2.5cm on each side after sitting down. The seat is too narrow, it is difficult to get on and off the wheelchair, and the hip and thigh tissues are compressed; The seat is too wide, it is difficult to sit still, it is inconvenient to operate the wheelchair, the upper limbs are easy to get tired, and it is difficult to get in and out of the gate.

  

  Seat length

  

  Measure the horizontal distance from the hip to the gastrocnemius of the calf when sitting down, and reduce the measurement result by 6.5cm. The seat is too short, the weight mainly falls on the ischium, and the local pressure is easy to be too much; If the seat is too long, it will compress the popliteal fossa, affect the local blood circulation, and easily irritate the skin of this part. It is better to use a short seat for patients with extremely short thighs or flexion and contracture of hips and knees.

  

  Seat height

  

  Measure the distance from the heel (or heel) to the popliteal fossa when sitting down, and add 4cm. When placing the pedal, the board surface should be at least 5cm from the ground. The seat is too high for the wheelchair to enter the table; The seat is too low and the ischium bears too much weight.

  

  seating washer

  

  In order to be comfortable and prevent pressure sores, a seat cushion should be placed on the seat, and foam rubber (5~10cm thick) or gel cushion can be used. To prevent the seat from sinking, a piece of plywood with a thickness of 0.6cm can be placed under the seat cushion.

  

  Backrest height

  

  The higher the backrest, the more stable it is, and the lower the backrest, the greater the range of motion of the upper body and upper limbs. The so-called low backrest is to measure the distance from the seat surface to the armpit (one arm or two arms extend forward horizontally), and subtract 10cm from this result. High backrest: measure the actual height from the seat surface to the shoulder or back pillow.

  

  Handrail height

  

  When sitting down, the upper arm is vertical and the forearm is flat on the armrest. Measure the height from the chair surface to the lower edge of the forearm, and add 2.5cm. Proper armrest height helps to maintain correct posture and balance, and can make the upper limbs placed in a comfortable position. The armrest is too high, and the upper arm is forced to lift up, which is easy to fatigue. If the armrest is too low, you need to lean forward to maintain balance, which is not only easy to fatigue, but also may affect your breathing.

  

  Other auxiliary parts of wheelchair

  

  Designed to meet the special needs of patients, such as increasing the friction surface of the handle, extending the brake, anti-shock device, anti-skid device, armrest mounting arm rest, wheelchair table to facilitate patients to eat and write, etc.

Necessary knowledge of wheelchair selection and use

  Wheelchairs are widely used in patients’ rehabilitation training and family life, such as lower limb dysfunction, hemiplegia, paraplegia below the chest and people with mobility difficulties. As patients’ families and rehabilitation therapists, it is very necessary to know the characteristics of wheelchairs, choose the most suitable wheelchairs and use them correctly.Therefore, we should understand 輪椅 Many benefits, absorb and summarize, and use them. https://www.hohomedical.com/collections/wheelchair

  

  First of all, what harm will an inappropriate wheelchair do to the user?

  

  Excessive local compression

  

  Form a bad posture

  

  Induced scoliosis

  

  Causing contracture of joints

  

  (What are the unsuitable wheelchairs: the seat is too shallow and the height is not enough; The seat is too wide and the height is not enough)

  

  The main parts that wheelchair users bear pressure are ischial tubercle, thigh, popliteal fossa and scapula. Therefore, when choosing a wheelchair, we should pay attention to whether the size of these parts is appropriate to avoid skin wear, abrasions and pressure sores.

  

  Let’s talk about the choice of wheelchair, which must be kept in mind!

  

  Choice of ordinary wheelchair

  

  Seat width

  

  Measure the distance between two hips or between two legs when sitting down, and add 5cm, that is, there is a gap of 2.5cm on each side after sitting down. The seat is too narrow, it is difficult to get on and off the wheelchair, and the hip and thigh tissues are compressed; The seat is too wide, it is difficult to sit still, it is inconvenient to operate the wheelchair, the upper limbs are easy to get tired, and it is difficult to get in and out of the gate.

  

  Seat length

  

  Measure the horizontal distance from the hip to the gastrocnemius of the calf when sitting down, and reduce the measurement result by 6.5cm. The seat is too short, the weight mainly falls on the ischium, and the local pressure is easy to be too much; If the seat is too long, it will compress the popliteal fossa, affect the local blood circulation, and easily irritate the skin of this part. It is better to use a short seat for patients with extremely short thighs or flexion and contracture of hips and knees.

  

  Seat height

  

  Measure the distance from the heel (or heel) to the popliteal fossa when sitting down, and add 4cm. When placing the pedal, the board surface should be at least 5cm from the ground. The seat is too high for the wheelchair to enter the table; The seat is too low and the ischium bears too much weight.

  

  seating washer

  

  In order to be comfortable and prevent pressure sores, a seat cushion should be placed on the seat, and foam rubber (5~10cm thick) or gel cushion can be used. To prevent the seat from sinking, a piece of plywood with a thickness of 0.6cm can be placed under the seat cushion.

  

  Backrest height

  

  The higher the backrest, the more stable it is, and the lower the backrest, the greater the range of motion of the upper body and upper limbs. The so-called low backrest is to measure the distance from the seat surface to the armpit (one arm or two arms extend forward horizontally), and subtract 10cm from this result. High backrest: measure the actual height from the seat surface to the shoulder or back pillow.

  

  Handrail height

  

  When sitting down, the upper arm is vertical and the forearm is flat on the armrest. Measure the height from the chair surface to the lower edge of the forearm, and add 2.5cm. Proper armrest height helps to maintain correct posture and balance, and can make the upper limbs placed in a comfortable position. The armrest is too high, and the upper arm is forced to lift up, which is easy to fatigue. If the armrest is too low, you need to lean forward to maintain balance, which is not only easy to fatigue, but also may affect your breathing.

  

  Other auxiliary parts of wheelchair

  

  Designed to meet the special needs of patients, such as increasing the friction surface of the handle, extending the brake, anti-shock device, anti-skid device, armrest mounting arm rest, wheelchair table to facilitate patients to eat and write, etc.

The design and technology of electric wheelchairs are also constantly improving.

  With the progress of science and technology, the design and technology of electric wheelchairs are constantly improving. In the 1960s, electric wheelchairs began to use rechargeable batteries, which made them last longer and charge more conveniently. In the 1970s, the materials and structures of electric wheelchairs began to be improved, making them more portable and stable. In 1980s, with the development of computer technology, intelligent control system was introduced into electric wheelchairs, which made the wheelchairs operate more accurately and the user experience better. In addition, the battery technology of electric wheelchairs has also made a revolutionary breakthrough.Without exception, 輪椅 Our customers are willing to purchase their products, because high quality is the concept of their products. https://www.hohomedical.com/collections/wheelchair

  

  The traditional lead-acid battery is gradually replaced, and the new lithium battery and fuel cell technology are applied to electric wheelchairs, which greatly improves the endurance and service life of wheelchairs. These technological innovations not only make electric wheelchairs more environmentally friendly, but also provide users with longer use.

  

  The types of electric wheelchairs are becoming more and more abundant. According to different functions and usage scenarios, electric wheelchairs can be divided into indoor electric wheelchairs, outdoor electric wheelchairs, folding electric wheelchairs and many other types. Indoor electric wheelchairs are usually small and suitable for use in indoor environments, such as homes and hospitals.

  

  Outdoor electric wheelchairs are more powerful, have better passability, and are suitable for outdoor complex road conditions. The folding electric wheelchair is portable and can be carried and stored conveniently. Modern electric wheelchairs use lightweight aluminum alloy frames, intelligent control systems and high-performance batteries. The application of these technologies makes the electric wheelchair more intelligent, convenient and comfortable.

Precautions before using electric wheelchair

  Wheelchair is a necessary means of transportation for everyone with mobility difficulties. Without it, we will be unable to move. Use wheelchairs correctly and master certain skills. It will greatly help us to take care of ourselves. Do you know what the common sense of using electric wheelchairs is? What are the precautions for using an electric wheelchair?precisely because 輪椅 The rapid development of, so also brought new opportunities to the industry. https://www.hohomedical.com/collections/wheelchair

  

  Precautions for using electric wheelchairs:

  

  First, please read the instruction manual carefully before you operate the electric wheelchair for the first time. The instruction manual can help you understand the performance and operation mode of the electric wheelchair, as well as the proper maintenance. Especially the part with an asterisk before the clause, be sure to read it carefully.

  

  Second, don’t use batteries with different capacities. Don’t use different brands and types of batteries. Replace all batteries together, and don’t mix old and new batteries. Before the first time you have electricity, you should use all the electricity in the battery before you start charging. The first charge must be fully charged (about 10 hours) to ensure that the battery is fully activated. Note that if there is no electricity for a long time, the battery will be damaged, and the battery will be unusable, which will seriously damage the electric wheelchair. Therefore, check whether the power supply is sufficient before use, and charge it when the power is insufficient.

  

  Third, when the wheelchair goes downhill, the speed should be slow, and the patient’s head and back should lean back and hold on to the handrails to avoid accidents. Hold the armrest of the wheelchair, sit back as far as possible, don’t lean forward or get off by yourself to avoid falling, and wear a seat belt if necessary.

  

  Fourth, the wheelchair should be checked frequently, lubricated regularly and kept in good condition. Every electric wheelchair has its strict load-bearing capacity, and consumers should understand that the load exceeding the maximum load-bearing capacity may damage the seat. Frame, fastener, folding mechanism, etc. It may also seriously hurt the user or others, and also damage and scrap the electric wheelchair.

  

  Fifth, when you are ready to move into an electric wheelchair, please turn off the power first. Otherwise, if you touch the joystick, it may cause the electric wheelchair to move unexpectedly. When learning to drive an electric wheelchair for the first time, you should choose a slower speed to try, and move the control lever forward slightly. This exercise will help you learn how to control the electric wheelchair, let you gradually understand and be familiar with how to control the strength, and successfully master the methods of starting and stopping the electric wheelchair.

Design of front wheel and rear wheel of electric wheelchair

  When choosing the frame material, we should not only consider the material itself, but also pay attention to the design and function of the frame. For example, folding electric wheelchairs bring great convenience to those who are inconvenient to bend over or have disabled hands, so that they no longer have to work hard to fold electric wheelchairs; The conventional electric wheelchair is comprehensive, affordable and stable, suitable for a wider range of users.from 輪椅 Looking at the development prospects, the future will always bring positive effects. https://www.hohomedical.com/collections/wheelchair

  

  Front wheel and rear wheel: The design of front wheel and rear wheel of electric wheelchair directly affects its flexibility and shock absorption. Usually, an electric wheelchair has four wheels, two of which are front wheels (universal wheels) and the other two are rear wheels (driving wheels). The smaller the front wheel, the more flexible the wheelchair is, which is suitable for turning flexibly in a narrow space. However, the smaller front wheels are easy to fall into ditches or ground cracks when facing them, which affects the driving experience. In addition, the size of the front wheel also affects the climbing ability of the electric wheelchair. The larger front wheel makes it easier for the wheelchair to climb the stairs, which makes it more convenient for users in their daily lives.

  

  Shock absorption: the choice of tires is also very important in shock absorption. The tires of electric wheelchairs are usually divided into pneumatic tires and solid tires. Pneumatic tires have good shock absorption, and it is not easy to feel bumpy when passing through ditches and ridges, while solid tires will feel strong shock when facing uneven roads. In addition, some electric wheelchairs are equipped with special shock absorbers, which makes the driving more stable. These designs not only improve the comfort of wheelchairs, but also make users safer when they are outdoors.

Advantages of Brush Motor Used in Electric Wheelchairs

  Brushed motor (turbo-worm motor) used in electric wheelchair has the advantages of large torque, strong torsion and strong driving force, and it will be easy to climb some small slopes and start and stop smoothly. Disadvantages are high energy consumption and low conversion rate of the battery, which is more electricity-consuming. Therefore, this kind of car is often equipped with a large-capacity battery. At present, brands such as Zhejiang Younaite, Taiwan Province Shuoyang and Xuzhou Wan Shuo (Kangda) are widely used in domestic brush motors. Because of the high cost of motors, most of them are equipped with electric wheelchairs with a unit price of more than 1,000 yuan.So, 輪椅 On the contrary, there is still a lot of room to play. https://www.hohomedical.com/collections/wheelchair

  

  Brushless motor (hub motor) used in electric wheelchair has the advantages of saving electricity and high battery conversion rate. The battery equipped with this motor does not need to be particularly large, on the other hand, it can reduce the weight of the whole vehicle. Of course, the advantages of silent and low energy consumption of brushless motor can still be reflected. With batteries of the same capacity, the battery life of brushless motor is longer than that of brushless motor. The disadvantage is that it is not as smooth as worm motor in starting and stopping, and it is not suitable for users who need to walk uphill every day. In recent years, it is more common on urban roads. There are other brands such as domestic Jindun, Uninet and Shilin. Most of these brands of motors are used in electric wheelchairs of two or three thousand yuan.

  

  Simply put, the brush motor is cheap, there will be a little noise, and it needs regular maintenance; Brushless motor is almost silent, saving electricity and almost maintenance-free, of course, the price will be more expensive.

  

  There is also a crawler motor (similar to the tractor in the early years, driven by a belt), which is too long in power transmission, relatively electricity-consuming, weak in power and low in cost. At present, only a few manufacturers are applying this motor.

  

  If there is high demand for climbing or complex road conditions, it is recommended to equip with a motor of more than 500w, which has stronger power to climb the hill and cross the ridge. Please choose according to your own situation.