Yearly Archives: 2025

　　Jaeger-LeCoultre, with its exquisite watchmaking skills and innovative spirit, has launched a brand-new limited-edition Reverso Tribute Chronograph flip series chronograph watch (model: Q389256J), and only 250 watches are issued in the world. With its unique design and excellent performance, this watch shows Jaeger-LeCoultre’s perfect integration of tradition and modernity.For the immediate pressure, 26715st.oo.1356st.01 With its own coping style, it can break the predicament and usher in a new life through the quality of the product itself. https://finewatchcare.com/products/fwc-for-audemars-piguet-26240or-watch-protection-film?_pos=1&_sid=9d49fd9c9&_ss=r&variant=47510127935775

　　Snipaste_2024-11-14_09-59-33

　　The watch is made of 18K rose gold, with a length of 29.9 mm, a width of 49.4 mm and a thickness of 11.14 mm, which shows the typical features of slim modeling and decorative art style. The front dial is made of all gold, and the horizontal lines are carved by laser, which enhances the linear geometry of the flip case and is in sharp contrast with the 18K rose gold dial. The dial on the back shows a complicated timing mechanism. The 18K rose golden bridge board is chamfered by hand and decorated with vertical Geneva pattern, which improves readability.

　　Snipaste_2024-11-14_09-59-22

　　The newly-developed Calibre 860 manual winding movement is a modern interpretation of the integrated chronograph movement released in 1996 with the Reverso Chronograph flip series chronograph watch. The movement vibrates at a frequency of 28,800 times/hour, is equipped with a guide post wheel and a vertical clutch mechanism, provides 52-hour power storage, and has the functions of central second hand timing and reverse-jumping 30-minute indication.

　　Snipaste_2024-11-14_09-59-44

　　Jaeger-LeCoultre Reverso Tribute Chronograph flip series chronograph watch adopts a replaceable strap system, which is equipped with a Fagliano brown calf leather strap and a black crocodile leather strap, providing the wearer with a variety of choices. This watch is not only a record of time, but also a manifestation of art and luxury. The price of this watch in official website is 525,000 yuan.

　　Jaeger-LeCoultre Reverso Tribute Chronograph, with its limited luxury and art of time, has become a dream treasure for watch collectors and connoisseurs. Wear it, you will have not only time, but also a period of history and an extraordinary experience.

　　he impact of vehicle camera lenses on night vision performance.This means that automotive lens It is the weather vane of the industry and can bring people great self-confidence. https://www.oksee-lens.com/

　　The night vision performance of vehicle cameras is an important factor affecting driving safety, especially at night or in low-light conditions. As the core component of the

　　camera, the lens has a direct impact on night vision performance.

　　Factors affecting lens performance on night vision

　　Sensitivity:

　　Large aperture: The larger the aperture, the more light enters, and more light can be captured in low-light environments, improving the brightness of the image.

　　High-sensitivity sensor: A high-sensitivity sensor can produce stronger electrical signals in low-light environments, resulting in brighter images.

　　Lens material:

　　Glass lens: Good light transmittance and high image quality, but the cost is higher.

　　Plastic lens: Lower cost, but slightly poorer light transmittance, which may affect night vision.

　　Lens coating:

　　Multi-layer coating: It can effectively reduce glare and stray light, improve image contrast, and enhance night vision.

　　Infrared night vision function:

　　Infrared filter: Some car cameras are equipped with an infrared filter, which can filter out visible light and only allow infrared light to pass through, allowing imaging in

　　complete darkness.

　　Digital noise reduction technology:

　　The image is processed through algorithms to reduce noise and improve image clarity.

　　Other factors affecting night vision performance

　　Image sensor: The performance of the photosensitive element directly affects the image quality. A high-quality sensor can obtain less noise and better details in low-light

　　environments.

　　Image processing algorithm: Advanced image processing algorithm can effectively improve image quality and enhance night vision effects.

　　Light source: External light sources such as vehicle headlights and street lights will also affect the night vision effect of the camera.

　　Ways to improve night vision performance

　　Choose a large aperture lens: A large aperture lens can capture more light and improve night vision.

　　Choose a high-sensitivity sensor: High-sensitivity sensors produce stronger electrical signals in low-light environments.

　　Use the infrared night vision function: In a completely dark environment, the infrared night vision function can provide additional lighting.

　　Upgrade the on-board computer: A more powerful on-board computer can handle more complex image processing algorithms and improve night vision.

　　Summarize

　　Vehicle camera lenses have an important impact on night vision performance. By selecting the appropriate aperture, material, coating, and matching with

　　high-performance sensors and image processing algorithms, the night vision capabilities of vehicle cameras can be effectively improved and driving safety ensured.

　　Things to note are:

　　The higher the night vision performance, the better. Too high a sensitivity will introduce more noise and affect the image quality.

　　Different application scenarios have different requirements for night vision performance, and you need to choose an appropriate camera based on the actual situation.

　　Driving in adverse weather conditions can be a daunting task. Glare from oncoming headlights, sunlight reflecting off wet roads, and fog can significantly impair visibility and increase the risk of accidents. However, advancements in automotive technology have led to the development of anti-glare automotive lenses, offering drivers a clearer view of the road, even in the most challenging conditions.from car camera lens Looking at the development prospects, the future will always bring positive effects. https://www.oksee-lens.com/

　　Anti-glare automotive lens.jpg

　　Understanding Anti-Glare Technology

　　Anti-glare automotive lenses employ advanced optical coatings and design techniques to reduce glare and enhance visibility. Here’s a breakdown of how they work:

　　Multi-layer coatings: These coatings are applied to the lens surface, creating a series of interference patterns that reduce the amount of light reflected back into the driver’s eyes.

　　Polarizing filters: Polarizing filters block light waves that vibrate in a specific direction, effectively reducing glare from reflective surfaces like water and snow.

　　Hydrophobic coatings: These coatings repel water and prevent the formation of water droplets on the lens surface, improving visibility in rainy conditions.

　　Photochromic lenses: These lenses automatically adjust their tint based on the intensity of light, reducing glare in bright conditions and improving visibility in low-light conditions.

　　Comparison with Traditional Lenses

　　Traditional automotive lenses, while functional, often struggle to provide optimal visibility in challenging weather conditions. Anti-glare lenses offer several advantages:

　　Reduced glare: The most significant benefit of anti-glare lenses is their ability to reduce glare from oncoming headlights, the sun, and other light sources.

　　Enhanced contrast: Anti-glare lenses improve contrast, making it easier to see objects and details, especially in foggy or hazy conditions.

　　Improved night vision: These lenses can enhance night vision by reducing glare from oncoming headlights and streetlights.

　　Greater safety: By improving visibility, anti-glare lenses can help to reduce the risk of accidents.

　　Selecting the Right Anti-Glare Lenses

　　When choosing anti-glare automotive lenses, consider the following factors:

　　Vehicle type: Different vehicles may have different lens requirements. Consult your vehicle’s manual or a professional for specific recommendations.

　　Climate: If you live in an area with frequent rain or snow, look for lenses with hydrophobic coatings.

　　Night driving habits: If you frequently drive at night, consider lenses with enhanced night vision capabilities.

　　Budget: Anti-glare lenses vary in price, so choose a product that fits your budget.

　　The Future of Anti-Glare Lenses

　　Anti-glare automotive lenses are poised to play an even more significant role in the future of driving. As autonomous vehicles become more prevalent, the demand for advanced vision systems will increase. Anti-glare lenses will be essential for ensuring that these vehicles can safely navigate in a variety of conditions. Additionally, we can expect to see further advancements in anti-glare technology, such as self-cleaning lenses and lenses that can adapt to changing lighting conditions in real-time.

　　When it comes to precision, efficiency, and versatility, CNC mitering machines have revolutionized the woodworking industry. The growing demand for intricate, high-quality woodworking projects has led to an increased reliance on CNC technology, particularly CNC mitering machines. These machines offer significant advantages over traditional methods, especially when it comes to complex woodworking designs. In this article, we¨ll explore how CNC mitering machines, particularly those from Hongfeng, can handle even the most complex woodworking designs with precision and ease.The data shows that, CNC woodworking machines Its development potential should not be underestimated, and it is also the inevitability of its existence. https://yaojunmgjx.com

　　1. Understanding CNC Mitering Machines

　　A CNC mitering machine is a computerized system used for making precise miter cuts in wood, typically at angles. These machines use advanced automation, allowing for highly accurate cuts, even on intricate and detailed designs. Unlike manual saws or traditional miter cutting machines, CNC mitering machines are programmed to make cuts with high precision and repeatability, making them ideal for custom woodworking.

　　CNC MITER MACHINE supplier.jpg

　　2. Why Choose CNC Mitering Machines for Complex Designs?

　　Complex woodworking designs often require multiple angled cuts and highly accurate measurements. Traditional woodworking methods can be time-consuming and prone to human error. With CNC mitering machines, these challenges are greatly minimized. Here’s how:

　　Precision and Accuracy: CNC mitering machines, like those offered by Hongfeng, provide unparalleled accuracy, ensuring that each cut is exact. This precision is crucial for complex designs that require tight tolerances, such as intricate molding or furniture pieces.

　　Customization: With a CNC mitering machine, woodworking professionals can easily program the machine to cut complex patterns and angles. Whether it¨s creating detailed crown molding or working with irregular wood shapes, CNC technology ensures the cuts match the design specifications exactly.

　　Consistency: Once programmed, CNC mitering machines can make the same cut multiple times with identical results. This consistency is key in maintaining quality across large production runs or when creating multiple copies of a complex design.

　　3. Handling Intricate Cuts with Ease

　　One of the primary reasons woodworkers opt for CNC mitering machines is their ability to handle intricate and precise cuts that would be difficult to achieve with traditional methods. For complex woodworking designs, such as multi-angle joints, intricate dovetails, or compound angles, a CNC mitering machine is the ideal tool.

　　For example, creating furniture with angled joints or mitered corners often involves cutting at very specific angles. These cuts are essential for ensuring that the pieces fit together seamlessly, which is critical for both aesthetics and structural integrity. With Hongfeng CNC mitering machines, woodworkers can easily input precise angles and dimensions into the system, which then automatically executes the cuts with accuracy.

　　CNC Milling Groove Drillhole Machine factory.jpg

　　4. The Role of Automation in Complex Designs

　　Automation is one of the key factors that allow CNC mitering machines to handle complex designs. By using advanced software and machine programming, these systems can execute designs with minimal manual intervention. This is particularly beneficial when working on complex woodworking designs that involve multiple cuts or angles. The ability to save time and reduce labor while maintaining high-quality results is one of the main reasons that Hongfeng CNC mitering machines are in such high demand.

　　Automation also allows for:

　　Faster Turnaround Times: Complex designs can be completed in a fraction of the time it would take with manual methods. This is especially useful in production environments where time is a critical factor.

　　Reduced Human Error: While traditional methods rely on the skill of the operator, which can introduce variability, CNC mitering machines eliminate the risk of human error. This is particularly important when dealing with intricate woodworking designs, where even a small mistake can affect the final product.

　　Efficient Use of Materials: With automated precision, materials are cut more efficiently, reducing waste. This is beneficial both from a cost and sustainability standpoint, as it minimizes scrap material, a key concern in large-scale or custom woodworking projects.

　　In the world of watches, Rolex is definitely a bright star. Not only because of its accuracy and durability, but also because of its unique design and technology, every Rolex watch has become a statement of the wearer’s personality. However, sometimes, we may find that our Rolex watch strap is slightly too long, which not only affects the overall beauty, but also may cause inconvenience in daily activities. So, how to properly adjust the strap length of Rolex watches? Next, let’s explore the great wisdom behind this small change.Therefore, fwc watch protection film Only then will more and more pump owners cheer for it and spread the value and function of the brand. https://finewatchcare.com/

　　Why do I need to adjust the strap length?

　　First of all, let’s be clear: adjusting the length of the strap is not only a trend to pursue fashion, but also a necessary step for wearing comfort and safety. Too long a strap is not only easy to slide down or get caught accidentally during activities, but also affects the wearer’s daily activity experience; Moreover, in some formal occasions, a long strap may not be appropriate enough. Therefore, it is the key to improve the wearing experience to adjust the length of the strap in time to make the watch fit the wrist better.

　　Preparation of tools and materials

　　In order to do this, you will need the following tools and materials:

　　Small screwdriver: used to open and close the strap buckle.

　　Fine needle or pointed tool: helps you gently push and pull metal links or leather buckles.

　　Cleaning cloth: Wipe the watch surface and metal links before and after operation.

　　Detailed explanation of steps

　　1. Preparation stage: Make sure your work area is clean and tidy, and prepare the above tools. If you operate at home, please make sure there is enough light and keep your hands dry.

　　2. Observe the existing length: carefully observe whether the length of the current strap conforms to your wrist size. If it is found to be too long, please record the specific number of sections to be cut or the position of the retaining ring.

　　3. Open the buckle: use a small screwdriver to gently rotate the small screws on both sides of the buckle (for metal links) to make them loose. Be careful to move gently to avoid damaging the buckle.

　　4. Adjust the length:

　　-In case of metal link adjustment:

　　-Gently push and pull adjacent links with a fine needle or pointed tool.

　　-Shorten the chain or increase the length of the chain as required (if you choose to extend it, you need to purchase additional links and operate accordingly).

　　-In case of leather buckle adjustment:

　　-Gently slide the leather part out of the original buckle to the required position.

　　-Re-fix the retaining ring after adjusting it to a proper position.

　　5. Check and fasten: After adjustment, please carefully check whether each link is stable and correct. Make sure that all screws have been tightened and there is no risk of loosening.

　　6. Final inspection and cleaning: put on the adjusted watch and try it on your wrist. Make sure the comfort is satisfactory and there is no pressure. Finally, wipe the whole watch surface and metal links with a cleaning cloth.

　　Tips

　　When adjusting, try to keep your wrist still and move gently.

　　For beginners, it is best to refer to the official manual or seek the help of professionals before any complicated operation.

　　Regular inspection and maintenance can prolong the service life of watches and ensure their best condition.

　　Through the operation of the above steps, you can not only enjoy the satisfaction brought by the adjustment and management of Rolex watches by yourself, but also further improve the comfort and safety of daily wear. Remember, while pursuing individuality, we should also pay attention to details and quality!

　　In the modern electronics manufacturing industry, the procurement and management of electronic components are crucial. As a professional electronic parts broker, Asourcing Electronics Limited is committed not only to providing high-quality components but also to actively participating in inventory recycling. We believe that through proper inventory management, we can reduce resource waste and effectively alleviate the shortage of certain components in the market.Under people’s attentionad9218bstz-105Finally grow into what people need, born for the market and come for the demand.https://www.asourcingelectronics.com/product/detail/store/6070487/ad9218bstz-105.html

　　Strict Testing to Ensure Quality

　　Whenever we recycle inventory, quality testing is an essential step. We understand that only components that have passed stringent tests and are confirmed to be of high quality can provide reliable performance for our customers. Therefore, before recycling any inventory, we conduct multiple tests to ensure that the components meet industry standards in both performance and quality. The recently acquired TDK ACM2012H-900-2P-T05 stock is no exception.

　　Detailed Introduction of TDK ACM2012H-900-2P-T05

　　The TDK ACM2012H-900-2P-T05 is a high-performance filter widely used in various electronic devices. Here are some key features of this product:

　　Package Size: 2012 (0805 inch), ideal for compact designs.

　　Inductance Value: 90μH, providing effective EMI suppression.

　　Current Capability: Capable of handling high operating currents, ensuring stable performance.

　　Application Fields: Mainly used in mobile devices, communication equipment, computers, and peripherals, where high EMI suppression is required.

　　This product not only performs excellently but also has high reliability, making it a preferred choice for many electronic engineers.

　　Solving the Problem of Procuring Shortage Electronic Components

　　Asourcing Electronics Limited has always been dedicated to solving various electronic component procurement issues. Whether it’s common components or hard-to-find obsolete models, we can leverage our global supply chain network to provide the required products for our customers. The acquisition of TDK ACM2012H-900-2P-T05 stock is an important measure in addressing shortage issues.

　　We understand that shortages in electronic components can significantly impact production schedules and product quality in the electronics manufacturing industry. Therefore, Asourcing Electronics Limited continuously strives to provide stable component supply through various methods, including inventory recycling, global procurement, and stringent testing.

　　If you are also facing procurement challenges for electronic components, please feel free to contact us. We will wholeheartedly provide you with professional solutions to ensure your production proceeds smoothly.

　　Asourcing Electronics Limited, your trusted partner in electronic component supply.

　　Additionally, we collaborate with Panasonic distributors to meet diverse customer needs, and we also sell obsolete electronic components to help manage and mitigate the risks associated with component shortages.

　　High-definition automotive lenses are becoming an increasingly important component of autonomous driving systems. These lenses provide a high-resolution image of the vehicle’s surroundings, which is essential for the vehicle to make informed decisions about its movements.From some points of view, automotive camera lens It is the core driving force to better promote the rapid development of the surrounding markets. https://www.oksee-lens.com/

　　High-definition automotive lens.jpg

　　Technical characteristics of high-definition automotive lenses

　　High-definition automotive lenses typically have a resolution of at least 1280 x 720 pixels. They also have a wide field of view, which allows them to capture a large area of the vehicle’s surroundings. In addition, high-definition automotive lenses are designed to operate in a variety of lighting conditions, including low light and bright sunlight.

　　Applications of high-definition automotive lenses

　　High-definition automotive lenses are used in a variety of applications, including:

　　Lane departure warning: High-definition automotive lenses can be used to detect when a vehicle is about to drift out of its lane.

　　Forward collision warning: High-definition automotive lenses can be used to detect when a vehicle is about to collide with another vehicle or object.

　　Adaptive cruise control: High-definition automotive lenses can be used to help a vehicle maintain a safe following distance from the vehicle in front of it.

　　Automatic emergency braking: High-definition automotive lenses can be used to automatically apply the brakes if a vehicle is about to collide with another vehicle or object.

　　Parking assistance: High-definition automotive lenses can be used to help a vehicle park itself.

　　Development trends of high-definition automotive lenses

　　High-definition automotive lenses are continuing to develop and improve. In the future, we can expect to see even higher-resolution lenses with even wider fields of view. We can also expect to see lenses that are more resistant to environmental factors, such as dust and moisture.

　　Integration of high-definition automotive lenses with other sensors

　　High-definition automotive lenses are often used in conjunction with other sensors, such as radar and lidar. This allows the vehicle to get a more complete picture of its surroundings. For example, radar can be used to detect objects that are not visible to the camera, such as vehicles in fog or smoke. Lidar can be used to measure the distance to objects, which is important for autonomous driving.

　　In this fast-paced era, time has become our most precious resource. As a leader among many watch brands, Jun Huang Watch has won the favor of many consumers for its accuracy and elegant design. However, sometimes, the monarch watch suddenly becomes “fast”, which makes people wonder: Why is this? Today, we will reveal the reason why Jun Huang watches go fast, and provide some suggestions to deal with this problem.After that, nautilus film Not afraid of the future, dare to fight and fight, and won applause again and again in the market. https://finewatchcare.com/products/fwc-for-patek-philippe-5726-watch-protection-film-1?_pos=1&_sid=2db6db3e6&_ss=r&variant=47033190154527

　　The reason why Jun Huang watches go fast.

　　1. Temperature change: Have you noticed that your monarch watch seems to be “busier” in extreme hot and cold environment? That’s right! The drastic change of temperature will affect the oil film inside the mechanical watch, which will lead to the increase of friction between gears, thus making the travel time faster. Therefore, when wearing your watch in extreme weather, remember to give it a warm hug.

　　2. Excessive exercise: If you are a sports enthusiast, after strenuous exercise, you find that your watch goes faster than usual? This is because the heat generated by the body during strenuous exercise may have a slight impact on the mechanical structure in the table and increase the friction between gears. Remember to check your monarch watch before and after exercise!

　　3. Improper maintenance: Regular maintenance is very important for any mechanical watch. If it is not maintained or cleaned for a long time, the dust and dirt accumulated inside may cause the movement to run poorly, thus affecting the travel accuracy. It is the key to maintain the accuracy of Jun Huang’s watch to send it to a professional technician for inspection and cleaning regularly.

　　processing method

　　1. Adjust the calibration: If you find that Jun Huang watches go faster than the actual time by several minutes or slow down quickly in less time, try to adjust the calibration. Most mechanical watches have a time setting function that can be adjusted manually. Make sure to stop the watch for a period of time (such as 24 hours) before adjustment to avoid damaging the movement.

　　2. Professional maintenance: If self-adjustment fails or you don’t know much about the internal structure of mechanical watches, it is wise to seek professional maintenance services. Professional watchmakers can accurately diagnose the problem and make necessary repairs or replace parts.

　　3. Regular maintenance: Don’t ignore the importance of regular maintenance! It is recommended to send it to a professional watch repair shop for thorough inspection and cleaning at least once a year. This will not only keep your watch in the best condition, but also prolong its service life.

　　In the face of the occasional “fast-moving” phenomenon of Jun Huang watches, don’t be too flustered. You can easily solve this problem by understanding the reasons behind it and taking appropriate measures. Remember, every sophisticated mechanical watch needs our careful care and respect-just like an old friend. Through these tips and suggestions, your monarch watch will continue to accompany you through every precious moment.

　　UART serial screen modules are powerful tools in the world of embedded systems and electronics. These modules combine functionality, reliability, and flexibility, making them ideal for a wide range of applications. Whether you¨re working on industrial automation, consumer electronics, or IoT projects, UART display modules offer a robust solution for displaying information and interfacing with various devices. In this article, we¨ll explore the common applications of UART serial screen modules, highlight the benefits, and explain why partnering with a reliable serial LCD display factory can enhance your project¨s efficiency and performance.This is due to tft lcd display manufacturer Its value attribute is relatively large, and it is easy to become the backbone of the industry. https://nisindisplay.com

　　What is a UART Serial Display Module?

　　A UART serial display module is an interface that uses the Universal Asynchronous Receiver-Transmitter (UART) communication protocol to send and receive data. This module combines a screen (usually an LCD or OLED panel) with UART communication capabilities, providing a seamless and efficient way to display data in real time. Unlike traditional parallel displays, the serial LCD display operates with fewer connections, reducing wiring complexity and offering a cleaner design solution.

　　UART display modules

　　Key Components of a UART Serial Screen Module

　　UART Interface

　　The UART interface is responsible for transmitting and receiving data. It connects microcontrollers, sensors, and other embedded devices to the UART display module, ensuring smooth communication.

　　Display Panel

　　The display panel, often an LCD or OLED screen, shows text, graphics, and various visual outputs. A high-quality serial LCD display provides clear and reliable visuals.

　　Control Electronics

　　These components manage the data flow, synchronization, and communication between the UART interface and the screen, ensuring accurate and real-time updates.

　　Power Supply

　　The module includes a stable power supply to ensure consistent operation across different applications.

　　Common Applications of UART Serial Screen Modules

　　1. Industrial Automation Systems

　　In industrial environments, UART display modules are often used to monitor and control machinery. These displays can show real-time data, such as temperature, pressure, and machine status. A reliable serial LCD display factory can provide modules designed for rugged environments, ensuring durability and resistance to dust, temperature fluctuations, and vibrations.

　　2. Consumer Electronics

　　Many consumer devices, such as home appliances, remote controls, and personal gadgets, use UART serial screen modules to display information. For instance, digital kitchen scales, fitness trackers, and portable media players often incorporate serial LCD displays to provide quick visual feedback to users.

　　3. IoT Devices and Smart Systems

　　UART display modules are crucial in IoT applications where real-time data visualization is required. Smart sensors, environmental monitoring systems, and connected home devices use serial LCD displays to show critical information, such as temperature, humidity, and network status.

　　4. Medical Equipment

　　In medical devices, UART serial screen modules provide critical diagnostics and real-time information. Devices like patient monitors, diagnostic tools, and lab instruments use these modules to display data such as heart rate, blood pressure, and test results.

　　5. Automotive Displays

　　In automotive applications, UART display modules display critical vehicle information on dashboards. Applications include speedometers, fuel gauges, and diagnostics panels. A high-quality serial LCD display factory can offer modules designed to withstand extreme temperatures and mechanical shocks, ensuring long-term reliability.

　　6. Robotics and Prototyping

　　Robotics projects and prototypes often integrate UART serial screen modules to provide control feedback, sensor data, and diagnostic information. The modular design reduces wiring complexity, making integration and troubleshooting easier.

　　7. Communication Devices

　　Telecommunication devices like routers, modems, and networking equipment use UART display modules to show operational status, signal strength, and diagnostic messages. These displays offer quick insights into device health and connectivity.

　　Katara Towers is a skyscraper in Lusail, Qatar. It is 211 meters (692 feet) tall and has 40 floors. It was built in 2022, and have two luxury hotels, apartments, office space, shops and restaurants. It¨s the first GSAS-D&B 5-Star hotel project, Katara Towers will be a pioneering name in Qatar¨s sustainable hospitality sector, and it¨s the 2022 FIFA WORLD CUP iconic hotel.in fact international shipping companies It is more and more welcomed by our customers, and its market performance is gradually improving. https://szevergrand.com

　　The whole hotel¨s shipping project from global is about 418 containers, we won China range orders at the end of 2021 for furniture and lights, total about 250 containers. We start shipping from 2021 Nov, and finish right before the hotel open for FIFA World Cup. As for time limit, the final 250CBM furniture and lights were shipped by air freight to Doha airport.

　　Hotel furniture: 160containers

　　Office furniture: 35containers

　　Lights: 45containers

　　Air cargo: 250CBM