Monthly Archives: January 2025

　　Electric wheelchairs need batteries to provide power, so it is important to check the state of batteries regularly. Both lead-acid batteries and lithium batteries have limited service life. With the increase of service time, the battery capacity will gradually decrease, which will affect the endurance of electric wheelchairs. It is generally recommended to check the battery performance every 1.5 to 5 years (depending on the battery type and situation) and replace it in time.More importantly, put 電動輪椅 It is imperative for us to make thorough analysis and maximize its social function. https://www.hohomedical.com/collections/light-weight-wheelchair

　　02

　　tyre

　　Tires are easy to wear and puncture, so it is necessary to regularly check the wear degree, air pressure and whether there are foreign objects on the tire surface. Damaged or aged tires need to be replaced in time.

　　03

　　Brake system

　　Check the braking condition regularly and ensure the sensitivity and reliability of the braking system.

　　04

　　Motor and drive system

　　Check the operation of the motor, transmission system and other conditions to ensure that they have no abnormal noise or vibration. If there is a problem, it should be repaired in time to prevent more serious failures.

　　05

　　Joystick and control system

　　Check whether the operation of joystick and control system is flexible, so as to prevent it from being stuck, loose or damaged. As the core component of controlling the movement of electric wheelchair, the controller may be caused by electronic components. Failure due to aging, humidity or impact. Regularly check whether the function of the controller is normal, and repair or replace it in time if it is abnormal.

　　06

　　charger

　　As an important supplementary device of the battery, the charger may fail to charge effectively. Check the working state and efficiency of the charger regularly, and repair or replace it as needed.

　　Rechargeable batteries have gradually become a necessity in people’s daily life. My friends, do you know how much safety hazard will be brought about by the irregular operation of electric wheelchair batteries? When the battery is charged for a long time, physical and chemical reactions are easy to occur inside the battery, resulting in a large amount of heat and gas. When the battery is overloaded and charged, it is easy to explode, igniting the plastic parts of the electric vehicle and releasing a large amount of toxic smoke, resulting in casualties and property losses.Doing these simple things can also make 電動輪椅價錢 Sowing high-quality genes will eventually grow into towering trees and become the leader in the industry. https://www.hohomedical.com/collections/light-weight-wheelchair

　　Pay attention to the following items when charging the battery:

　　1. When charging the electric wheelchair, use the charger adapted to the electric wheelchair, and check whether the rated input voltage of charging is consistent with the power supply voltage. It is forbidden to cover or place the charger on the seat cushion. Unplug the plug on the AC power supply after charging, and then unplug the plug connected to the battery. It is forbidden to connect the charger to the AC power supply for a long time without charging.

　　2. The charging time of the electric wheelchair is suggested to be 6-8 hours. When the charging indicator light changes from red to green, it means that the battery is fully charged. Do not charge the electric wheelchair for a long time, especially in summer, when it is hot and charging for a long time, it is difficult for the charger to dissipate heat and cause combustion. Keep an eye on it when charging.

　　3. When charging the electric wheelchair, check whether the connector is loose, whether the line equipment is aging, and the rubber of the wire is damaged, which may easily lead to short circuit and fire.

　　4. Qualified electric wheelchairs, chargers and batteries produced by manufacturers with production licenses shall be used, and electric wheelchairs and accessories shall not be modified in violation of regulations. It is strictly forbidden to change or modify the charging circuit without permission. If the product or personnel accident occurs as a result, the manufacturer is not responsible.

　　5. Electric wheelchairs should be parked in designated areas, not in stairwells, evacuation passages, and not occupying fire truck passages.

　　6. Do not buy and use some non-standard and over-standard electric wheelchairs, and do not use non-original chargers to charge electric wheelchairs.

　　7. Do not charge the electric wheelchair by private wiring, and do not charge it indoors, in the basement, at the entrance of the building, etc. Avoid charging immediately after driving at high temperature.

　　8. Electric wheelchairs that are not used for a long time should be charged first, and placed after being fully charged, and then the main switch of the circuit should be disconnected.

　　9. Keep a good ventilation environment at the charging place. Do not charge in the sun or wet environment. Be sure to stay away from flammable and explosive materials during charging and storage. Do not expose the charger to outdoor heat sources, such as radiator, fire source and sunlight.

　　10. Do not move the wheelchair while the electric wheelchair is charging.

　　11. Never modify the electric wheelchair, and check and maintain it regularly to prevent problems before they happen.

　　With the progress of science and technology, the design and technology of electric wheelchairs are constantly improving. In the 1960s, electric wheelchairs began to use rechargeable batteries, which made them last longer and charge more conveniently. In the 1970s, the materials and structures of electric wheelchairs began to be improved, making them more portable and stable. In 1980s, with the development of computer technology, intelligent control system was introduced into electric wheelchairs, which made the wheelchairs operate more accurately and the user experience better. In addition, the battery technology of electric wheelchairs has also made a revolutionary breakthrough.According to related reports, 電動輪椅價錢 To a large extent, it leads the changes of market conditions. https://www.hohomedical.com/collections/light-weight-wheelchair

　　The traditional lead-acid battery is gradually replaced, and the new lithium battery and fuel cell technology are applied to electric wheelchairs, which greatly improves the endurance and service life of wheelchairs. These technological innovations not only make electric wheelchairs more environmentally friendly, but also provide users with longer use.

　　The types of electric wheelchairs are becoming more and more abundant. According to different functions and usage scenarios, electric wheelchairs can be divided into indoor electric wheelchairs, outdoor electric wheelchairs, folding electric wheelchairs and many other types. Indoor electric wheelchairs are usually small and suitable for use in indoor environments, such as homes and hospitals.

　　Outdoor electric wheelchairs are more powerful, have better passability, and are suitable for outdoor complex road conditions. The folding electric wheelchair is portable and can be carried and stored conveniently. Modern electric wheelchairs use lightweight aluminum alloy frames, intelligent control systems and high-performance batteries. The application of these technologies makes the electric wheelchair more intelligent, convenient and comfortable.

　　The controller is the core component of the electric wheelchair, which can also be understood as the “steering wheel” to control the direction of the wheelchair, and is responsible for the operation of the linkage motor. Its quality directly determines the maneuverability and service life of the electric wheelchair, and the functions and performance of the controller equipped with different configurations of electric wheelchairs will be different. Advanced electric wheelchairs are usually equipped with intelligent control system, which can freely adjust the speed and direction according to the user’s habits and environment to provide a more comfortable driving experience (controllers can be divided into basic models/with folding function/with reclining function/multi-function buttons according to the operation panel) and other feedback functions of intelligent voice broadcast. However, the basic electric wheelchair usually has simple control function, and it is not equipped with the common functions of intelligent voice broadcast and mobile phone remote control adaptation. Individual manufacturers have also added usb-adapted mobile phone charging port and lighting lamp to the controller.Now, everyone is right 電動輪椅價錢 Are more concerned, hoping to get more benefits from it. https://www.hohomedical.com/collections/light-weight-wheelchair

　　Most imported brand controllers are composed of upper and lower controllers, while most domestic brands only have upper controllers. Generally, the brushless ones in China are generally divided into upper controller and lower controller, and most of the brushes have only upper controller. Among the imported controller brands, PG in Britain and Dynamic in New Zealand are widely used. Domestic brands include Wuyang and Shiyou, Shanghai Zhilian Aomang, Nuole, Maikong, Pilotage, etc. Comparatively speaking, imported brands are better, and the cost and price are higher than domestic brands. However, in recent years, the rise of domestic products can also meet the needs and experiences of most consumers. You can also use the following operations to judge whether the controller is good or bad.

　　1. Turn on the power switch and push the controller to feel whether the vehicle is stable when starting; Release the controller and feel whether the car stops immediately after a sudden stop. It is advisable to judge whether the controller is normal by starting and stopping slightly.

　　2. Control the rotating car to rotate 360 degrees in situ, and feel whether the steering is smooth and flexible, subject to the steering sensitivity.

　　With the continuous development of industrial technology, pump equipment plays an increasingly important role in industrial production. In the fields of chemical engineering, medicine, food, etc., pump equipment, as an important tool for conveying media, has a significant impact on production efficiency and quality. In recent years, with the strengthening of environmental awareness and the increasing demand for safety production, enterprises have become more strict in product selection. In the post pandemic era, the global economy is in a downturn, and business operations are facing even more severe challenges. How to reduce costs and increase efficiency, improve production efficiency and product quality has become an urgent problem for enterprises to solve. As one of the important transportation tools, the selection and optimization of pump equipment have also become an important way for enterprises to improve production efficiency and reduce costs.know Plating filter The market will definitely bring great influence to the whole industry. http://www.luoyuan108.com/

　　The KG series of coaxial acid alkali resistant pumps we have launched are carefully developed to meet the needs of enterprises. This pump has multiple unique design and technological advantages, which can reduce costs, improve production efficiency, and ensure production safety for chemical enterprises. Let’s learn about the features and advantages of this pump together.

　　01 Product Features

　　The KG series coaxial acid alkali resistant pump is a pump designed for the chemical industry, which has the following characteristics:

　　1. Wide applicability: This pump can be applied to media with various chemical properties, and its applicable temperature is below 85 ≧ for FRPP and PVDF, depending on the different chemical properties. At the same time, choosing different pump body materials can resist strong acids and alkalis, as well as the chemical properties used in fluorination series.

　　2. Unique shaft seal design: adopting Teflon Bellows Seal self cooling type, selecting shaft seal materials Sic, Carbon, Ceramic according to various chemical properties. Compared to other similar products, the shaft seal design of this pump is more unique, which can effectively ensure the service life and operational safety of the pump.

　　3. The rear cover is a combination type: easy to assemble, with no cooling circulation circuit design, and cannot be used idle. The rear cover of the pump adopts a combination design, which is easy to assemble and does not require a cooling circulation circuit, ensuring the safe operation of the pump.

　　4. Low noise: The pump is made of high-quality materials and exquisite craftsmanship, with advantages such as low noise and low vibration. It ensures stable operation of the pump while reducing noise interference during the production process.

　　5. High reliability: The pump adopts advanced production technology and precise mechanical processing, and has undergone multiple rigorous tests and verifications to ensure the reliability and stability of the product.

　　02 Product specifications and parameters

　　03 Advantage Comparison

　　Compared with traditional pumps, the advantages of KG series coaxial acid alkali resistant pumps are:

　　Low noise and low vibration: Designed with advanced fluid analysis technology, the pump’s noise and vibration are minimized, ensuring a quiet and stable production site.

　　Low energy consumption: The design and optimization of pumps can greatly reduce energy consumption, thereby saving energy costs.

　　Long lifespan: The shaft seal of the pump adopts a Teflon Bellows Seal self cooling design, which can greatly extend the service life of the pump.

　　No need for additional cooling circulation circuit: The rear cover of the pump is a combination type, easy to assemble, without a cooling circulation circuit design, and cannot be used idle, making the use of the pump more convenient and reliable.

　　04 Application Fields

　　The KG series coaxial acid alkali resistant pumps are widely used in industries such as chemical, pharmaceutical, electronics, and environmental protection for the transportation, filtration, and circulation of acid alkali liquids. For example:

　　Chemical industry: In fields such as organic synthesis and hydrocarbon cracking, acid-base liquids are inevitable, which requires reliable acid-base pumps for transportation.

　　Pharmaceutical industry: In the process of drug synthesis and formulation, a certain amount of acid-base liquid is required, and the role of acid-base pump is particularly important.

　　Electronics industry: In the production of semiconductors, LCD displays, and other products, various corrosive and electroplating solutions are required. These liquids have strong corrosiveness and volatility, and high-quality corrosion-resistant pumps are needed. The FRPP and PVDF materials of KG series pumps can withstand the corrosion of these chemicals, and adopt a unique Teflon Bellows Seal self cooling shaft seal design, effectively avoiding the damage of chemical corrosion to the pump.

　　Overall, the KG series coaxial acid alkali resistant pumps have the advantages of high efficiency, corrosion resistance, safety, and stability, and are widely used in various industries. Our company will continue to be committed to developing high-quality and efficient pumps, providing high-quality products and services for various industries.

　　Before introducing different configurations of electric wheelchairs, let’s first understand the basic structure of electric wheelchairs. Electric wheelchair is usually composed of motor, controller, battery, frame and other main parts. The motor is responsible for driving the wheels, the controller controls the speed and direction of the motor, the battery provides electric energy, and the frame supports the whole structure. Different configurations of electric wheelchairs are different in these parts, which will be introduced in detail below to help you understand.Therefore, this is the choice 電動輪椅價錢 The reason, there is no denying its positive impact. https://www.hohomedical.com/collections/light-weight-wheelchair

　　Motor: The motor of electric wheelchair is its core component, which directly affects the performance of wheelchair. At present, the electric wheelchairs on the market usually adopt DC Motor and AC Motor. DC motor usually has a high speed and is suitable for use on flat roads, while AC motor has a large torque and is suitable for driving on ramps and uneven roads. In addition, the power of the motor is also a key factor in the selection. The greater the power, the stronger the climbing ability and load capacity of the electric wheelchair. Therefore, when choosing an electric wheelchair, it is necessary to choose the appropriate motor type and power according to the user’s needs and specific use environment. In the difference between electric wheelchairs, it is necessary to distinguish between brush motors and brushless motors, and between AC motors and DC motors.

　　Brushed DC motor refers to a DC motor that uses a carbon brush to contact with a rotating armature to exchange polarity and provide current. Brush provides current to armature through power supply when armature rotates, so it is also called carbon brush motor. Its advantages are simple structure and low use cost, but the brush is easy to wear and has limited service life, and at the same time, the brush will also produce electric spark interference, which will lead to high noise of the motor and is not suitable for high-precision applications.

　　Brushless DC motor refers to a DC motor that uses an electronic commutator to control the phase sequence of the motor, without using a brush to contact the armature. Its advantages are long life, high efficiency, low noise, stable operation and fast response, so it is widely used in high-precision application fields such as high-performance power tools and electric vehicles. Disadvantages are complex structure and high cost.

　　The chemical formula for nitric acid is HNO3. Anhydrous pure nitric acid is a colorless liquid that easily decomposes into nitrogen dioxide, resulting in a reddish brown color.It is reported that, Chemical filter The data performance is getting better and better, which is of great reference value and is likely to become the vane of the industry. http://www.luoyuan108.com/

　　Many chemical users need to choose nitric acid pumps. So, how should nitric acid pumps be selected and which pump is better? Firstly, when transporting nitric acid, it is necessary to understand the characteristics, temperature, concentration, density, and equipment conditions of nitric acid, and then choose the corresponding pump type. Usually, nitric acid pumps can use 304 or 316L, but nitric acid reacts with metals. For the sake of service life, it is recommended to use fluoroplastic magnetic pumps. Of course, fluoroplastic centrifugal pumps can also be used. Generally, we recommend choosing magnetic pumps, which are fully enclosed, without shaft seals, and have the advantage of no leakage.

　　It should be noted that nitric acid has swelling properties for most rubber and fluororubber. Therefore, it is recommended to use expanded PTFE or pure PTFE for the auxiliary static seal of the pump (due to the hardness of pure PTFE, the sealing surface of nitric acid pumps often cannot be tightly compressed, so it is recommended to use soft PTFE).

　　The controller is the core component of the electric wheelchair, which can also be understood as the “steering wheel” to control the direction of the wheelchair, and is responsible for the operation of the linkage motor. Its quality directly determines the maneuverability and service life of the electric wheelchair, and the functions and performance of the controller equipped with different configurations of electric wheelchairs will be different. Advanced electric wheelchairs are usually equipped with intelligent control system, which can freely adjust the speed and direction according to the user’s habits and environment to provide a more comfortable driving experience (controllers can be divided into basic models/with folding function/with reclining function/multi-function buttons according to the operation panel) and other feedback functions of intelligent voice broadcast. However, the basic electric wheelchair usually has simple control function, and it is not equipped with the common functions of intelligent voice broadcast and mobile phone remote control adaptation. Individual manufacturers have also added usb-adapted mobile phone charging port and lighting lamp to the controller.As we all know, 電動輪椅價錢 The emergence of the market is worthy of many people’s attention, which has aroused the waves of the whole market. https://www.hohomedical.com/collections/light-weight-wheelchair

　　Most imported brand controllers are composed of upper and lower controllers, while most domestic brands only have upper controllers. Generally, the brushless ones in China are generally divided into upper controller and lower controller, and most of the brushes have only upper controller. Among the imported controller brands, PG in Britain and Dynamic in New Zealand are widely used. Domestic brands include Wuyang and Shiyou, Shanghai Zhilian Aomang, Nuole, Maikong, Pilotage, etc. Comparatively speaking, imported brands are better, and the cost and price are higher than domestic brands. However, in recent years, the rise of domestic products can also meet the needs and experiences of most consumers. You can also use the following operations to judge whether the controller is good or bad.

　　1. Turn on the power switch and push the controller to feel whether the vehicle is stable when starting; Release the controller and feel whether the car stops immediately after a sudden stop. It is advisable to judge whether the controller is normal by starting and stopping slightly.

　　2. Control the rotating car to rotate 360 degrees in situ, and feel whether the steering is smooth and flexible, subject to the steering sensitivity.

　　The treatment of corrosive liquids has always been a common challenge in many industrial fields. To solve this problem, it is particularly important to choose a pump suitable for transporting corrosive media. The KB series self-priming acid alkali pump is a high-performance pump that combines multiple advantages and is suitable for various complex working environments such as acid and alkali. The following are the characteristics, performance, applications, and selection references of KB series self-priming acid alkali pumps. We hope that through this article, everyone can have a deeper understanding of KB series self-priming pumps.As can be seen from the new data, chemical pump The market influence is also growing, and the product share is also relatively increasing, which has great potential in the future. http://www.luoyuan108.com/

　　Product Features

　　1. Unique shaft seal design – The interior adopts Teflon Bellow Seal self cooling design, effectively protecting the pump shaft and improving cooling effect. This design ensures stable operation of the pump under harsh conditions and improves its service life.

　　2. Self suction design – The self suction force is particularly strong, reaching up to 20ft, effectively avoiding liquid backflow inside the pump. At the same time, the equipped check valve design further prevents liquid backflow, ensuring the stable operation of the pump.

　　3. Strong acid resistance, strong alkali resistance, and strong corrosion resistance – made of materials such as CFRPP and PVDF, it can resist the erosion of various corrosive media such as strong acids and bases, ensuring the long-term service life of the pump.

　　4. The integrated design of the rear cover, shaft seal shield, and foot seat makes maintenance and assembly more convenient, while also enhancing the overall aesthetics of the pump.

　　5. The inlet needs to be equipped with a bottom valve – the bottom valve can effectively block the suction of foreign objects and protect the safe operation of the pump.

　　6. The outlet needs to be equipped with a check valve – a check valve can prevent instantaneous backflow during shutdown, avoiding damage to the pump body and pump idling.

　　Specification parameters

　　Flow range: 200-900 (L/min)

　　Head range: 6-32 (m)

　　Materials used: FRPP, PVDF

　　Motor power: 0.75-7.5 (kw)

　　Temperature range: 0-75 ≧ (PP, FRPP) 0-90 ≧ (PVDF)

　　Usage and maintenance

　　1. Before using the pump, please ensure that the bottom valve is installed correctly to prevent foreign objects from being sucked into the pump.

　　2. Before starting the pump, please check if the inlet and outlet valves are open to ensure the normal operation of the pump.

　　3. It is recommended to regularly inspect and maintain the pump to ensure its normal operation and extend its service life.

　　4. Regularly replace bearings and seals to avoid wear and leakage.

　　5. If any abnormal situation is found during the operation of the pump, it should be stopped immediately for inspection.

　　Application Fields

　　The KB series self-priming acid and alkali resistant pumps are widely used in chemical, pharmaceutical, food, environmental protection and other fields. In these fields, KB pumps can be used to transport various corrosive media such as acids, bases, salts, etc. For example, in the chemical industry, KB pumps can be used to transport corrosive acid liquids such as sulfuric acid and hydrochloric acid; In the pharmaceutical industry, KB pumps can be used to transport various drug solutions; In the food industry, KB pumps can be used to transport various acid-base solutions and corrosive food additives.

　　Other fields: In addition to the above fields, KB pumps can also be applied in environmental protection, oil, natural gas and other fields. For example, in the field of environmental protection, KB pumps can be used to treat pollutants such as industrial wastewater and acidic gases. In the field of oil and gas, KB pumps can be used to transport various corrosive media, such as acidic gases, alkaline solutions, etc.

　　Selection suggestions

　　When choosing a self-priming pump, the following factors need to be considered:

　　1. Medium characteristics: including the corrosiveness, viscosity, density, and other properties of the medium, in order to select suitable materials and structures.

　　2. Process parameters: including flow rate, head, pressure, and other parameters to select the appropriate model and power.

　　3. Environmental conditions: including temperature, humidity, air quality, etc., in order to select the appropriate protection level and motor configuration.

　　4. Application scenarios: including the industry of use, purpose, installation method, etc., in order to select suitable functions and structures.

　　5. Based on the above factors, it is possible to choose the appropriate KB pump model and configuration for the application. In addition, it is recommended to consider factors such as brand and quality assurance when selecting pumps to ensure long-term stable operation and service life.

　　In summary, the KB series self-priming acid alkali pump is a high-performance, corrosion-resistant, and easy to maintain pump. Its unique shaft seal design and self-priming design make it perform well in handling corrosive liquids. Whether in the chemical, pharmaceutical, or other industrial fields, the KB series self-priming acid and alkali resistant pumps are a reliable choice. If you need more information about the KB series self-priming acid alkali pump, please feel free to contact our professional team, and we will be happy to serve you.

　　Wheelchairs are widely used in patients’ rehabilitation training and family life, such as lower limb dysfunction, hemiplegia, paraplegia below the chest and people with mobility difficulties. As patients’ families and rehabilitation therapists, it is very necessary to know the characteristics of wheelchairs, choose the most suitable wheelchairs and use them correctly.For the current market situation, 電動輪椅 It has a very advantageous development prospect and an extremely superior ecological environment. https://www.hohomedical.com/collections/light-weight-wheelchair

　　First of all, what harm will an inappropriate wheelchair do to the user?

　　Excessive local compression

　　Form a bad posture

　　Induced scoliosis

　　Causing contracture of joints

　　(What are the unsuitable wheelchairs: the seat is too shallow and the height is not enough; The seat is too wide and the height is not enough)

　　The main parts that wheelchair users bear pressure are ischial tubercle, thigh, popliteal fossa and scapula. Therefore, when choosing a wheelchair, we should pay attention to whether the size of these parts is appropriate to avoid skin wear, abrasions and pressure sores.

　　Let’s talk about the choice of wheelchair, which must be kept in mind!

　　Choice of ordinary wheelchair

　　Seat width

　　Measure the distance between two hips or between two legs when sitting down, and add 5cm, that is, there is a gap of 2.5cm on each side after sitting down. The seat is too narrow, it is difficult to get on and off the wheelchair, and the hip and thigh tissues are compressed; The seat is too wide, it is difficult to sit still, it is inconvenient to operate the wheelchair, the upper limbs are easy to get tired, and it is difficult to get in and out of the gate.

　　Seat length

　　Measure the horizontal distance from the hip to the gastrocnemius of the calf when sitting down, and reduce the measurement result by 6.5cm. The seat is too short, the weight mainly falls on the ischium, and the local pressure is easy to be too much; If the seat is too long, it will compress the popliteal fossa, affect the local blood circulation, and easily irritate the skin of this part. It is better to use a short seat for patients with extremely short thighs or flexion and contracture of hips and knees.

　　Seat height

　　Measure the distance from the heel (or heel) to the popliteal fossa when sitting down, and add 4cm. When placing the pedal, the board surface should be at least 5cm from the ground. The seat is too high for the wheelchair to enter the table; The seat is too low and the ischium bears too much weight.

　　seating washer

　　In order to be comfortable and prevent pressure sores, a seat cushion should be placed on the seat, and foam rubber (5~10cm thick) or gel cushion can be used. To prevent the seat from sinking, a piece of plywood with a thickness of 0.6cm can be placed under the seat cushion.

　　Backrest height

　　The higher the backrest, the more stable it is, and the lower the backrest, the greater the range of motion of the upper body and upper limbs. The so-called low backrest is to measure the distance from the seat surface to the armpit (one arm or two arms extend forward horizontally), and subtract 10cm from this result. High backrest: measure the actual height from the seat surface to the shoulder or back pillow.

　　Handrail height

　　When sitting down, the upper arm is vertical and the forearm is flat on the armrest. Measure the height from the chair surface to the lower edge of the forearm, and add 2.5cm. Proper armrest height helps to maintain correct posture and balance, and can make the upper limbs placed in a comfortable position. The armrest is too high, and the upper arm is forced to lift up, which is easy to fatigue. If the armrest is too low, you need to lean forward to maintain balance, which is not only easy to fatigue, but also may affect your breathing.

　　Other auxiliary parts of wheelchair

　　Designed to meet the special needs of patients, such as increasing the friction surface of the handle, extending the brake, anti-shock device, anti-skid device, armrest mounting arm rest, wheelchair table to facilitate patients to eat and write, etc.